Friday, July 24, 2009

"Good as New XS1100 Carburetors. Cleaning, Rebuilding and Sales!"

Carb Ultrasonic Cleaning and Rebuild Services


Are you looking for XS1100 Carbs that are as good as new? Just like these, for your XS1100? Well this is the place! Click the "Contact Jessie" button below, and use the form that pops up and he will get you set up! Or go to Jessie's new site http://xs1100carbs.blogspot.com/

Here's some of the Services

Basic Cleaning
Carbs ultrasonically cleaned and blown through with carb cleaner and compressed air. Jets, emulsion tubes, and any heavily varnished removable parts soaked in Chem-Dip.

Full Service
Carbs ultrasonically cleaned and blown through with carb cleaner and compressed air. Jets, emulsion tubes, and any heavily varnished removable parts soaked in Chem-Dip. Carbs rebuilt with a minimum of new float valves, and bowl gaskets depending on individual carb needs. Custom jetting for non-stock applications (ie aftermarket exhausts and air filters) Carbs are assembled, bench synched, and on bike tested and tuned.

Polishing Service
This is an additional service that can be added on to either service for carb caps and outer bowl faces. (May not be do-able depending on metal condition).

Parts and shipping (both ways) are additional. Shipping weight for carbs is around 8 lbs 4 oz. This will allow you to price shipping both ways to/from 95540. USPS is usually the cheapest and fastest.




Give it a second or two for the email form to pop up, if the form doesn't want to work you might have to copy and paste Jessie's email into your regular email service, or use the form to you right and I will contact him.

(Be sure to leave your email address so he can contact you back!)



I got my XS 1100 Carburetors from Jessie and they work great!
"Shop"

12 comments:

  1. GOOD DAY MY NAME IS STEFAN VENTER
    I HAVE A 81 XS11 SPECIAL. I BOUGHT THE BIKE ABOUT 4 MONTHS AGO, FROM THE START I FOUND ONE OR TWO PROBLEMS WIT THE BIKE, I HAVE TAKEN THE BIKE TO TWO BIKE GARAGES THAT CHARGED ME A LOT OF MONEY TO SERVICE THE CARBS, AND YET BOTH OF THEM DID NOTHING, I WOULD LIKE A STEP BY STEP INSTRUCTIONS HOW TO SERVICE THE CARBS PLEASE

    ReplyDelete
  2. ya dont say how much it costs to have ya carbs refurbed mate . respect spanner1954.

    ReplyDelete
  3. You are correct! That's because it's not my business, however if you click the link and let Jessie know what you need. He will let you know what it will cost for his services and he's very reasonable. Or like Stefan you can take your carbs to a couple places and still have them not be functional, nothing against Stefan, but I'm sure he wishes that it had been done right by those other shops the first time. Jessie is a one stop shop that does it right the first time including jetting for your application, and he guarantees his work. Not to mention how well he knows these bikes.

    ReplyDelete
  4. hi bike looks good want to do exactly same thing the only question i have is where the rear shocks went? is there any shocks in rear at all. thank you

    ReplyDelete
  5. Replies
    1. I'm currently out of the Country but I'm normally located in the South East US

      Delete
  6. hey I got 1979 xs1100 and I need to find some carbs are gone can't find them anywhere do any other carbs work

    ReplyDelete
  7. I would like a set of refurbished carbs for 1979 xs1000. can you supply? I want them jetted for individual air filters. How much money?

    ReplyDelete
  8. Looking for 79 number four carb and 80 number one carb. Anyone has either one of them for sale?

    ReplyDelete
  9. How much for 4 like new carbs for a 79 xs1100 yamaha

    ReplyDelete
  10. I just see my name is Joshua Conley I'm from Ohio I have a 1979 possibly 80 Xs 1100 Chopper I bought a few sets of carbs and have them redone still can't get the bike to run I have got bigger carburetors off another bike and it ran but not the power it should have anyway you can help I can send my carburetors to you see how much you charge me this bike is very important to me it was my father's and now mine and I want to pass it on to my son if you can call me at 740-409-3054 and leave a message or text would be great ask for Josh

    ReplyDelete
  11. I have a full rebuilt 78-79 rack of mikuni carbs for the xs1100. I'd sell em, and ship from michigan 49442. If anyone is interested contact me 12313294579

    ReplyDelete

Random Pictures Of the Build